tcl.list-lines Verb: Access/TCL

tcl.list-lines

Command tcl.list-lines Verb: Access/TCL
Applicable release versions: AP
Category TCL (746)
Description displays communications protocol information for every port attached to the virtual machine.

The report includes the following headings:

"Line#" is the pib or port.number.

"Baud/rt" is the baud rate of the port.

"Parity" is the state of parity: none, even or odd.

"Stop" is the number of stop bits.

"Data" is the number of data bits.

"DCD" is the data carrier detect status, ON or OFF.

"Xon/off" is the state of flow control, ENABLED or DISABLED.

"TTY" is the Unix tty device attached to the port.

On Unix Implementations, the Unix device name is also displayed.
Syntax list-lines {(options}
Options
Example
list-lines
Line# Baud/rt Parity  Stop  Data  DCD Xon/off       TTY
0     9600     NONE     1     8  OFF   enabled   /dev/tty0
1                                OFF                      
2     9600     NONE     1     8  OFF   enabled   /dev/tty2
3     9600     NONE     1     8  OFF   enabled   /dev/tty3
4     9600     NONE     1     8  OFF   enabled   /dev/tty4
Purpose
Related tcl.set-port
tcl.dcd_rp
tcl.dcd-off
tcl.xonoff
tcl.list-ports
tcl.:reset-async
tcl.dtr-on
port.number
tcl.list.lines
tcl.setport
tcl.ll_rp